ieee projects for eee







Other IEEE EEE 2010-2011 Projects

1. Programmable active power factor improvement scheme for single phase switch mode boost rectifiers

2. SVPWM Techniques and Applications in HTS PMSM Machines Control

3. Space vector pulse width modulation of three level inverter extending operation into over modulation region

4. Impact of Reactive Power in Power Evacuation from Wind Turbines

5. Transient Fault Response of Grid Connected Wind Electric Generators

6. PMSM Speed Sensor less Direct Torque Control Based on EKF

7. Zbus Transmission Network Cost Allocation

8. Electromagnetic Interference with Electronic apparatus by switching surges in GIS – Cable system

9. Predictive Valley Current Control for Two Inductor Boost Converter

10. A Modular Fuel Cell, Modular DC–DC Converter Concept for High Performance and Enhanced Reliability

11. A 24-pulse AC-DC converter employing a pulse doubling technique for vector controlled induction motor drives

12. Modeling of three levels converters used in Electric Traction

13. Second Order Sliding Mode for Traction Control in Ride-by-Wire Sport Motorcycles

14. Development of a Slip and Slide Simulator for Electric Locomotive Based on Inverter Controlled Induction Motor

15. Optimized Discontinuous PWM Algorithm With Variable Load Power Factor For Multilevel Inverters

16. A Novel Technique for Distribution System Feeder reconfiguration

17. Simulation of a Space Vector PWM Controller for a Three-Level Voltage Fed Inverter Motor Drive.

18. Control of Three Phase, Four-Wire PWM Rectifier

19. Indirect Matrix Converter Based on Investigations of Field-oriented control for Induction Motor

20. Two-stage Matrix Converter Used in Wind Power Generation System Application Research

21. Impacts of AC Generators and DSTATCOM Devices on the Dynamic Performance of Distribution Systems

22. Matlab/Simulink Implementation for Reducing the Motor Derating and Torque Pulsation of Induction Motor using Matrix Converter

23. The Use of Matrix Converters in Direct Torque Control of Induction Machines

24. Simulink Implementation of Induction Machine Model – A Modular Approach.

25. Analysis of Different Schemes of Matrix Converter with Maximum Voltage Conversion Ratio

26. Power Flow Control with UPFC in Power Transmission System

27. Analysis of a zero voltage switching Cuk converter

28. Analysis and modeling of unified power flow controller: Modification of Newton Raphson algorithm and user defined modeling approach power flow studies

29. Minimization of torque ripple in SRM drives

30. A unified three phase transformer model for distribution load flow calculations

31. Power flow control with UPFC in power transmission system

32. Experiment on Fractional Frequency Transmission System

33. Analysis, Design and Implementation of modified single phase inverter

34. Switching Frequency Imposition and Ripple Reduction in DTC Drives by Using Multilevel Converter

35. Consideration of Input Parameter Uncertainties in Load Flow Solution of Three-Phase Unbalanced Radial Distribution System

36. A novel Method of Load Compensation under Unbalanced and Distorted Voltages

37. Development of Three-Phase Unbalanced Power Flow Using PV and PQ Models for Distributed Generation and Study of the Impact of DG Models

38. Position Control Design Project (PD Controller – Root –Locus Design

39. Application of Voltage- and Current- Controlled Voltage Source Inverters for Distributed Generation Systems

40. Unified Power Flow Controller (UPFC) Based Damping Controllers for Damping Low Frequency Oscillations in a Power System

41. Unbalanced Three-Phase Distribution System Load-Flow Studies Including Induction Machines

42. Power Flow Control in a Distribution System Through an Inverter Interfaced Distributed Generator

43. Permanent Magnet Synchronous Machine Hybrid Torque Control

44. Electromagnetic Transients of a Micro-Turbine Based Distributed Generation System

45. Harmonic Mitigation in AC–DC Converters for Vector Controlled Induction Motor Drives

IEEE 2010

1. Hybrid Differential Evolution Particle Swarm Optimization Algorithm for Reactive Power Optimization (IEEE) 2010

2. Multiband Hysteresis Modulation and Switching Characterization for Sliding-Mode-Controlled Cascaded Multilevel Inverter(IEEE) 2010

3. A Novel Three-Phase to Five-Phase Transformation Using a Special Transformer Connection 2010

4. Reliability Evaluation ofB ulk Power Systems Incorporating UPFC (IEEE) 2010

5. A 28-Pulse AC-DC ConverterB ased SMPS for Telecom Power Supply (B ePress) 2010

6. A Real Time Power System Harmonic Estimator considering Fundamental Frequency Variations (B ePress) 2010

7. Feasibility Study on Application of Voltage Source Inductive Filtering Converter in HVDC-Light Systems (IEEE) 2010

8. Comparative study of induction motor efficiency optimization control strategy for electric vehicle 2010

9. A Single-Phase Voltage-Controlled Grid-Connected Photovoltaic System With Power Quality Conditioner Functionality (IEEE) 2009

10. Transient stability control of TCSC (IEEE) 2009

11. A Control Methodology and Characterization of Dynamics for a Photovoltaic (PV) System Interfaced With a Distribution Network (IEEE) 2009

12. Reduced rating VSC with a Zig-Zig transformer for current compensation in three phase four wire distribution system (IEEE) 2009

13. UPQC signal detection algorithm based on PSO-Fuzzy (IEEE) 2009

14. Power quality improvement in conventional electronic load controller for isolated Power Generation (IEEE) 2009

15. Model predictive control of Unified power quality conditioner with control saturation (IEEE) 2009

16. A fast-acting dc-link voltage controller for 3 phase DStatcom to compensate ac and dc loads (IEEE) 2009

17. PMSM speed sensor less direct torque control based on EKF (IEEE) 2009

18. Investigation of Sub Synchronous Resonance With VSC-B ased HVDC Transmission Systems (IEEE) 2009

19. Operation and control of single phase micro-sources in a utility connected grid (IEEE) 2009

20. MultiConverter Unified Power-Quality Conditioning System: MC- UPQC (IEEE) 2009

21. The use of facts devices in distributed power systems-modeling ,interface case study(IJCE) 2009

22. Development of Hybrid Active Power FilterB ased on the Adaptive Fuzzy Dividing Frequency-Control Method (IEEE) 2009

23. A modular fuel cell modular DC-DC converter concept for High performance and Enhanced reliability (IEEE) 2009

24. New multivariable dynamic model & robust control of a Voltage Source Converter for power system application (IEEE) 2009

25. Dynamic Modeling and Simulation of Hybrid Power SystemsB ased on Renewable Energy (IEEE) 2009

26. Double FrequencyB uck converter (IEEE) 2009

27. Optimization of PI coefficients in DStatcom non linear controller for regulating dc voltage using Generic Algorithm (IEEE) 2009

28. Optimal placement of shunt connected facts devices in a series compensated long transmission line (WCE) 2009

29. Voltage flicker compensation using STATCOM (IEEE) 2009

30. A variable speed, sensor less, induction motor using dc link measurement (IEEE) 2009

31. Soft computing techniques for the control of an active power filter (IEEE) 2009

32. Wide speed range estimation with parameter identification schemes of sensor less induction motors (IEEE) 2009

33. Design and analysis of dynamic voltage restorer for deep voltage sag and harmonic compensation (IEEE) 2009

34. Constant Power Control and Fault-Ride-Through Enhancement of DFIG Wind Turbines with Energy Storage (IEEE) 2009

35. Modeling of FACTS DevicesB ased on SPWM VSCs (IEEE) 2009

36. Design of a Modular UPQC Configuration Integrating a Components Economical Analysis (IEEE) 2009

37. A New Proposal for Power Quality and Custom Power Improvement: OPEN UPQC (IEEE) 2009

38. Space Vector Method for Voltage Dips and Swells Analysis (IEEE) 2009

39. Analytical Modeling of a Square Wave Controlled Cascaded Multilevel STATCOM (IEEE) 2009

40. Three-Phase Transformer Model Including Magnetic Hysteresis and Eddy Currents Effects (IEEE) 2009

41. Output Feedback Control of Single-Phase UPQCB ased on a Novel Model (IEEE) 2009

42. Harmonic Analysis and Improvement of a New Solid-State Fault Current Limiter (IEEE) 2009 43.

Multivariable Dynamic Model and Robust Control of a Voltage-Source Converter for Power System Applications (IEEE) 2009

44. A Versatile Control Scheme for a Dynamic Voltage Restorer for 2009

Power-Quality Improvement (IEEE)

45. Study on a Novel Hybrid Active Power Filter Applied to a High- Voltage Grid (IEEE) 2009

46. Seven-Level Shunt Active Power Filter for High-Power Drive Systems (IEEE) 2009

47. Dynamic Voltage RestorerB ased on Flying Capacitor Multilevel Converters Operated by Repetitive Control (IEEE) 2009

48. Sensor less Current Control of Three-Phase Inverter-B ased Distributed Generation (IEEE) 2009

49. Optimum Space Vector Computation Technique for Direct Power Control (IEEE) 2009